Custom Peptide Packaging for Ohio
A recurring question from customers with established products is not how to make packaging, but how to make the next run match the last one. Colour drift between reprints is the most visible failure in packaging, and the most avoidable.
It is worth addressing directly, because the fix is a specification decision made once rather than a quality problem chased repeatedly.
Why reprints drift
Process colour is built from four inks, and small variations in each compound into a visible shift. Solid backgrounds show it most, because there is nothing to distract the eye.
- CMYK builds vary — Four variables interacting, each within tolerance individually.
- Substrate changes the result — The same build prints differently on coated and uncoated board.
- Separate components drift apart — Lid and base, or carton and label, printed on different runs.
- Spot colours do not — A pre-mixed ink is the same ink every time, which removes the variable entirely.
For any brand colour that appears as a solid across a panel, a named PMS spot is the reliable answer. The trade-offs are set out on the printing and finishes page.
Building a repeatable specification
- Name spot colours explicitly — In the artwork file, not converted to process.
- Keep an approved physical sample — A retained reference is worth more than a proof, because it ages the same way the product does.
- Fix the substrate — Changing board changes colour. Lock the material along with the ink.
- Print matched components together — Lid and base, or carton and label, produced in the same window.
- Record the finishing — Matte and gloss laminates shift perceived colour differently.
Typical Ohio specifications
- Two-colour cartons — A spot brand colour plus black — economical and highly repeatable.
- Matte lamination — Consistent appearance and good scuff resistance for repeat handling.
- Retained reference samples — Kept against the job for future reorders.
- Coordinated carton and label runs — Produced together so the pair matches.
No premises in Ohio. We produce packaging centrally and ship it to Ohio addresses. There is no Ohio office, warehouse, factory or local team, and transit time belongs to the carrier, so no delivery date is guaranteed.
Packaging questions from Ohio
Do you have an Ohio facility?
No. We manufacture packaging and ship to Ohio addresses. There is no local office, plant or team.
Why did our reprint not match the first run?
Most commonly because the colour was specified as a CMYK build rather than a spot. Four inks each varying slightly within tolerance compound into a visible shift, particularly on solid backgrounds.
Is a spot colour worth the extra cost?
If your brand colour appears as a solid area and you reorder regularly, yes. If the artwork is photographic with no critical solid, process colour is usually fine.
Should we keep a physical sample?
Yes. A retained approved sample is a better reference than a proof, because it is the actual material and it ages the way your stock does. We keep one too.
Can carton and label colour be matched exactly?
They can be matched closely. Different substrates reproduce colour differently, so a spot reference plus a physical comparison at proofing gets you as close as the materials allow.
Planning a reorder?
Send us your existing carton. We will tell you what the colour was specified as, and whether moving to a spot would fix the drift you have been seeing.
We ship to Ohio and nationwide. Delivery time depends on the carrier and is not guaranteed.
Prefer the detailed form?
The full quote form captures material, printing, finishing and shipping preferences in one go.