2ml Peptide Vial Boxes
Small-format cartons and rigid boxes built to hold 2ml vials snugly, with cavity tolerances tight enough that a short vial cannot tip.
Full catalogue
Everything we make
Twenty-eight made-to-order packaging formats, grouped by the decision each one answers: vial size, capacity, construction, protection, application and labelling.
Nothing here is a stock item. Every carton, cavity and label is cut to the vial you send us, which is why there are no prices on this page — the specification comes first.
01
Selection guideVial Size Packaging
Cartons and boxes specified around a single vial footprint, from 2ml through to 10ml.
3ml Peptide Vial Boxes
Cartons for the crossover vial size, including dual-fit cavities that tolerate the height difference between 2ml and 3ml formats.
5ml Peptide Vial Boxes
Cartons for the most widely used vial format, balancing printed panel area, protection and per-unit cost across single and multi-count packs.
10ml Peptide Vial Boxes
Boxes engineered for the extra mass and height of 10ml vials, with deeper cavities, heavier board and structures that resist crushing under load.
02
Selection guideVial Kit Boxes
Boxes organised by how many vials they hold and how those vials relate to one another.
Single Vial Packaging Boxes with Insert
One vial, one box, held in a fitted insert so it cannot move — the format for products that are sold, shipped and presented individually.
2-Vial Kit Boxes
Two-cavity boxes for paired components — an active vial and its diluent, or two related products — with the glass kept apart.
4-Vial Kit Boxes
Four-cavity boxes where layout geometry does the work — square, linear or sequenced arrangements that tell the user what order things go in.
6-Vial Kit Boxes
Six-cavity boxes where a fitted tray usually beats individual cavities on both cost and appearance, and where pack weight starts to drive the structure.
10-Vial Kit Boxes
Ten-cavity packs where load distribution, base strength and organised layout matter more than presentation flourishes.
03
Selection guidePeptide Box Styles
Constructions compared honestly — how each is made, what it costs, and where it fails.
Rigid Peptide Boxes with Magnetic Closure
Wrapped greyboard construction with a concealed magnet closure — the format for vial sets that are presented, kept and reopened.
Tuck End Peptide Boxes
The folding carton that most vial packaging is built on — one glued seam, ships flat, assembles in seconds, and costs less than anything else.
Two-Piece Lid and Base Peptide Boxes
A separate lid lifting clear of a separate base — no hinge, no glued seam under load, and a fit tolerance that has to be right.
Sleeve and Tray Peptide Boxes
A drawer that slides out of a printed sleeve — the structure where the tray carries the weight and the sleeve carries the brand.
Flip Top Peptide Boxes with Insert
A hinged lid that stays attached to the box — the structure for products that are opened repeatedly and never want a loose lid.
Peptide Display Boxes
Counter-top units with a printed header and a tiered base that holds vials at a readable angle — packaging designed to be looked at, not stored.
Luxury Peptide Packaging
Where the material stack, the interior and the finishing combination matter more than the structure — and where the cost drivers are worth understanding before you specify.
Window Peptide Boxes
Die-cut openings with a clear film patch that show the vial without opening the box — and the structural trade-offs that come with removing board.
04
Selection guidePeptide Box Inserts
The components that actually hold the vial — foam, paperboard, formed trays — and the outer packaging around them.
Peptide Boxes with EVA Foam Insert
Milled closed-cell foam cavities that grip a vial along its body — the insert that absorbs impact rather than simply locating the contents.
Peptide Boxes with Cardboard Insert
Die-cut and folded paperboard structures that hold vials using geometry rather than material — recyclable with the carton and the lowest cost per unit.
Peptide Boxes with Blister or Molded Tray
Vacuum-formed pockets that hold every vial at an identical height and angle — the insert to use when the contents are seen, sealed or machine-loaded.
Peptide Shipping Boxes
Outer cartons, insulated mailers, liners and dividers built as secondary packaging — with the validation left where it belongs, with you.
05
Selection guideCompound-Specific Packaging
Empty packaging built for particular vial and kit formats. We supply packaging only — never the compounds themselves.
Semaglutide Vial Packaging Boxes
Small-format cartons for single-dose and multi-dose vials, with the panel space and clear label areas that pharmacy and prescriber labelling demands.
Tirzepatide Packaging Boxes
Cartons for mixed-format packs — vials, pens and prefilled syringes — where component length rather than vial diameter drives the whole structure.
NAD+ Vial Packaging Boxes
Multi-vial course and subscription packs where the box has to stay organised across weeks of use and look right on a wellness retail shelf.
Glutathione Vial Boxes
Two-component packs pairing a powder vial with a solvent vial, in opaque cartons where light exclusion is a packaging requirement rather than a claim.
HCG Vial Boxes
Multi-component kit cartons holding a vial, a diluent ampoule and often a syringe — three different shapes that each need a different cavity profile.
Bacteriostatic Water Packaging Boxes
High-count, cost-driven cartons for larger multi-dose diluent vials, usually plain or lightly printed and designed to be over-labelled downstream.
06
Selection guidePeptide Vial Labels
Printed labels for small glass vials — materials, adhesives, formats and the constraints that make small labels difficult.
Custom Peptide Vial Labels
Waterproof, oil-resistant labels sized to 2ml, 3ml, 5ml and 10ml vials, with variable data, batch fields and barcode-ready layouts.
Not sure which of these you need?
Send the vial, the count and how the pack travels. We will point you at the right two or three pages and quote them side by side.